What is a home reverse osmosis unit?
An RO Plants for Home unit is used to purify contaminated drinking water. In the process of this system, the molecules of contaminated water are forced to pass through a semi-permeable membrane which blocks impurities and contaminants. As a result, impurities and contaminants are removed from the environment and clean, pure drinking water is produced.
Water Logic home reverse osmosis units are capable of removing different kinds of molecules, impurities and ions from water. You can get the best reverse osmosis unit price in Pakistan at the best online water purifier store in Pakistan. These water purifiers are widely used for drinking water production and industrial purposes.
Other features of reverse osmosis systems for home use
- Most advanced 5-stage reverse osmosis water filtration process
- National Science Foundation (NSF) certified 5 gallon water storage tank
- Produces 100 gallons per day
- 0001 micron membrane size
- FDA-approved polypropylene flat cap housing
- Imported cartridge and filter housings
- Fully self-closing valve
- Long reach chrome faucets
- Fully assembled in the USA
- 100% factory tested, sanitized and ready for installation
- Exclusive 6-month warranty
- Ideal as a home reverse osmosis unit
(Home Reverse Osmosis Units) How Reverse Osmosis Systems Work
Reverse osmosis is a process that is also known as ultrafiltration. It works by reducing particles to the molecular level, creating clean water. Reverse osmosis filters produce high quality, pure water with reduced levels of salt as well as other water contaminants.
Most reverse osmosis systems work in the same way. However, their performance can be affected by a number of factors. For example, the inlet water pressure, the quality of the filter and membrane, the temperature of the water, and the type and amount of TDS (total dissolved solids).
Reverse osmosis systems work by forcing water from the tap through the membrane and filter. They can also be used in series. The membranes allow only water to pass through, leaving contaminants and impurities to be flushed down the drain. The pure water is then fed into a holding tank that can be accessed by opening the faucet.
View Reverse Osmosis System
Stage 1 – (SED) Sediment Filter
The water passes through a high-capacity polypropylene sediment filter. This sediment filter removes all particles as large as 5 microns, including rust, dirt and sediment.
Stage 2 – (GAC) Granular Activated Carbon Filter
The second stage is the Granular Activated Carbon filter. This also removes contaminants as small as 5 microns. This is the next stage of pre-filtration. In the second stage, the water is free of unpleasant chlorine, foul tastes and odors, color and turbidity.
Stage 3 – (ACB) Activated Carbon Block Filter
The water in the ACB passes through an activated carbon block filter. There is also a 5-micron filter to remove residual chlorine, taste and odor. At this stage, chemicals that are difficult to remove, including chloramines, are also filtered out.
Stage 4 – (ROM) Reverse Osmosis
Water is pushed through a 0.0001-micron high removal rate TFC membrane, which is the heart of Hydronics home reverse osmosis units. This is the same technology used to produce bottled water. This NSF certified semi-permeable membrane effectively removes TDS (total dissolved solids), viruses, bacteria, lead, arsenic, sodium, cysts, giardia, chromium and many other contaminants.
Stage 5 – (PAC) Post-Activated Carbon
The final stage uses a finer PAC filter that acts as an in-line filter for final polishing. This filter removes any remaining taste and odor as the water leaves the storage tank, leaving the water tasting fresh.
Additional Stages of a Hydro Reverse Osmosis Unit
The following stages can be added to meet your specific requirements
Stage 6 – (BMB) Balancing Mineral Balls
This filter improves water quality by adding minerals necessary for human development and health, such as calcium, magnesium, sodium and potassium, which are commonly found in natural mineral water.
Stage 7 – (ABF) Alkaline Balancing Filter for PH Balancing
The alkaline filter transforms acidic RO water into perfect natural alkaline calcium ionized water. The alkaline filter simply reduces ionized minerals such as calcium, magnesium, sodium and potassium ions that are lost during the water purification process.
Stage 8 – (ANS) Antibacterial Nano Silver
This filter removes 99.9% of the bacteria and coliform bacteria that pass through the RO membrane.
More Stories
Surviving the Heat: Effective Strategies to Handle Heatwaves and Stay Healthy
As you get aging, these tips might help
Reduce the Harm Caused by Anxiety