October 5, 2022

Newzwibz

Guest Post Out Reach Services

The Ultimate Guide to Change D-Link Extender Admin Password

Every D-Link wireless range extender comes with a default login password. If not changed on time, anyone who is aware of it can easily gain access to your extender and tweak its settings as per their preference. Thus, it is really important that you change the default admin password of your D-Link extender.

Wondering how to do that? Take the help of the step-by-step guidelines mentioned in this post and learn how to change the password of your device via dlinkap.local to keep it safe from hackers or unauthorized users.

How to Change D-Link Extender Admin Password?

  1. Turn On Your D-Link Extender

Plug your D-Link wireless range extender into a wall socket located near your home router. Press the power button on your extender and wait for the LED light to turn a shade of green.

  1. Connect Your WiFi Devices

As soon as you see the LED on your D-Link range extender blink green, grab an Ethernet cable. Connect one end of the Ethernet cable to the extender and another to your home router. You can also create a connection between your devices with the help of a wireless source.

  1. Access Dlinkap.local

Get access to a computer or laptop and open an internet browser of your preference on it. In the address field of your internet browser, type the default web address of your Dlink WiFi extender and press the Enter key.

  1. Log in to Your D-Link Extender

Once you are on the D-Link extender login page, input the default admin password and username. Click the Log In button to reach the main dashboard of your D-Link wireless range extender.

  1. Change the Default Admin Password

Head over to the Settings option and click the Management button. Under the Admin section, enter the new password you want your device to have. Thereafter, click the Save button to make your changes effective.

With that, you will successfully be able to change the admin password of your D-Link wireless range extender. On the off chance, you come across any issues during the process, refer to the troubleshooting hacks mentioned below.

Fixed: Unable to Change D-Link Extender Password

Proper Power Supply

One of the major reasons why you are unable to change the admin password of your D-Link wireless range extender is because of an improper power supply. To resolve the issue, consider plugging your WiFi device into a different wall socket.

Check the Ethernet Connection

Perhaps you did not check the Ethernet cable while using it to connect your D-Link range extender and your home router. There is a possibility that it is worn or damaged from somewhere. So, get the cable you are using replaced with a new one.

Use the Correct Login Credentials

In order to change the password of your D-Link wireless extender, you need to access the setup wizard. And to do so, using the correct login credentials is important. But, maybe, you messed up while entering the admin details. Thus, the next time you try to log in to your device, ensure you are entering the right password and username.

Update the Firmware

Chances are that the firmware of your D-Link wireless range extender is not running on an updated version. Therefore, log in to your device and update the firmware of your wireless device. If you are not sure about the process, refer to the user manual

Contact Your ISP

Last, but not least, a weak internet connection can also stop you from changing the default admin password of your D-Link extender. It looks like your Internet Service Provider is not doing his job properly. To ask him to get rid of the issue, get in touch with him and give him a strict deadline for the same.

Once you are done following these troubleshooting hacks, check whether you are successfully able to change the admin password your device.

Conclusion

Hopefully, the step-by-step guidelines mentioned above will help you change the default admin password of your D-Link wireless range extender and keep it secure from hackers.

If you also want to change the password of your dlinkrouter, the aforementioned instructions will remain the same.