Instant Ways to Fix Netgear Extender Orange Light Issue

If you are using a Netgear WiFi extender to amplify your router signals at your home. And suddenly noticed your WiFi extender is blinking orange light instead of green then, don’t worry. It occurs sometimes due to minor issues occurring on your Netgear WiFi extender. But don’t neglect this issue as it can be transformed into a major one and completely ruin your internet experience. Therefore, for making your experience better, here, we have come up with the solutions to fix the Netgear WiFi extender orange light issue. Just head further for more knowledge.

Solutions to Fix Netgear Extender Orange Light Issue

1. Reboot Your Netgear Extender

   Rebooting your Netgear WiFi extender can help you to remove numerous issues which you are facing while accessing the Netgear extender. LED blinking orange light issue is one of them and can be resolved by simply going through the below-mentioned instructions:

• Disconnect all your WiFi-enabled devices from the Netgear WiFi extender.
• Turn the extender off and disconnect it from the power source.
• Wait for some time and re-connect your Netgear WiFi extender to the power source.
• Turn it on and connect your WiFi-enabled devices using Netgear_ext SSID.

1. Check the Power Supply

   You are required to make sure that your Netgear WiFi extender is receiving a stable power supply. Therefore, check your AC cable as cuts in the AC cable can cause power outage and you can get stuck with the orange light issue. Additionally, don’t forget to check the power socket to which your WiFi extender is connected. Avoid damaged or short-circuited power sockets.

2. Check Internet Connections

   Always make sure that your internet devices are well-connected and receiving proper WiFi signals. If you are using a wired connection, then make sure that your Ethernet cable doesn’t have any wear or tear. If it’s damaged, then change it to avoid any further issues. For a wireless connection, you are required to position your WiFi extender within the range of your Netgear router to avoid loss of signals.

Important Note: While configuring a new extender setup, prefer wired connections to avoid signal loss.

3. Update Netgear Extender Firmware

   Using the old version of Netgear WiFi extender firmware can also create the orange light issue. Therefore, we suggest users always update their Netgear extender’s firmware to its latest version as it will add more advanced features and resolve issues.

   To update your Netgear extender firmware, just follow the steps:

• First, you are required to turn on your Netgear WiFi extender.
• Then, turn on your computer device and launch an internet browser.
• You are required to enter the Netgear extender default web address in the address field and hit the Enter button.

Important Note: You can also use Netgear default IP i.e. http://192.168.1.250 to access the Netgear login page.

• On the Netgear login page, enter Netgear WiFi extender default username and password, and click the login button.
• Once you have successfully accessed the Netgear WiFi extender setup wizard, browse your cursor to the Advanced tab.
• Under the Advanced tab, go to Administration options.
• Then, click the Firmware Update option.
• Click the Check button to see if the new updates are available or not.
• If a new update is available, then click the Yes button to begin the firmware update process.
• Now, you are required to follow the on-screen instructions to complete the process.

Once your Netgear extender’s firmware is updated successfully, restart your Netgear WiFi extender and check if the issue persists or not. If you still facing the orange light issue, then we suggest you reset and reconfigure your Netgear WiFi extender to resolve the issue.

4. Reset and reconfigure your Netgear router

   If none of the above methods works for you, then this will work. Resetting your Netgear WiFi extender to the factory default settings mode eliminates most of the issues faced by users while accessing Netgear WiFi extender services. For your ease, here we are giving you brief detail on how you can reset your Netgear WiFi extender to the default factory settings.

• First and foremost, you are required to look for the Reset button on your Netgear WiFi extender.
• Once located, press and hold the Reset button till the LEDs start flashing.
• Then, your Netgear WiFi extender will restart automatically and be restored to the default factory settings.

Now, reconfigure your Netgear WiFi extender using the default web address.

In this manner, you can easily rectify the Netgear extender orange light issue without any difficulty.